Electronics Design in Melbourne: Common Mistakes to Avoid

The majority of executives are responsible for managing the performance of the product or warranty returns. They are also the ones who can tell that the most common cause of headaches in manufacturing often comes from manufacturers and suppliers. Reliability in electronics design in Melbourne is very important as it can make or break the product. Design has an integral role to play in the product’s manufacturability. The easier it is to manufacture, the better will be its tolerance to standard variations in manufacturing processes.

Moreover, it has a role to play in component reliability as those designs that avoid the use of extended value components, lessens the application of electrical and thermal stresses can help reduce the risk that marginal components would induce product failure.

 

Flex cracking

This mistake usually occurs when the printer circuit board (PCB) under a ceramic-chip capacitor extremely bends. This capacitor is not capable of responding to cracks and strains. Flex events could happen during testing, depaneling, card insertion, attachment or from accidental dropping or mechanical shock. The approach to this will depend on the design constraints, cost constraints, as well as the degree of acceptable risk.

 

Custom Connections and Joint Wear

Some extensive design for reliability efforts are highly focused on avoiding wear out. One of the best approaches to this is to assess robustness in the design phase by deriving predictions based on the first and second order models.

Designers of PCB only think in two dimensions. But in some applications, heat sources that separate from electronics could be hot or close enough to cause a serious temperature rise. A designer might forget about such heat sources during modeling and might not install them during testing only to find out that they can actually cause solder joints to wear out.

 

Electrolytic Capacitors

Most designers like an electrolytic capacitor for its high capacitance. On the other hand, they may hate it as they tend to fail over time. Such love and hate relationship have led to a wide range of methods for predicting and derating lifetime. So, what will be the best approach to this? This will be dependent on whether you plan on derating voltage, temperature, or ripple current. Given this, you have to keep in mind that an electrolytic capacitor will work best when voltage is applied to it. Without voltage, it will have no capacitance and dielectric.

Designing for the purpose of reliability can be a bit of a challenge. It plays an important role in great success of a product as well as the company’s bottom line. It is important that you assess the evolving design, solve problems before they become worse, and find potential weaknesses. Addressing and recognizing possible problems would prevent the serious issues along the way. With this, you will be worry-free so you can better sleep at night.

 

Office Catering Sydney: Essential Tips for Great Lunches

So many things happen in an office on a daily basis. There are so many tasks to accomplish and people to deal with. There are also events that you need to attend to. At some point, you may be in charge to host a lunch for everyone in the office. Though this seems like a small event, this can be stressful especially if you don’t how and where to start.

Organizing a meal for everyone can take over your to do list that is already packed. But, it’s a good to know that you can prevent this from happening if you opt to have an office catering Sydney instead of doing everything on your own. Below are some more reasons why hiring a caterer is the best way to go.

 

Setup Matters

Whether it’s a big or small lunch, the way how you set up the meal matters a lot. And we have to admit that not everyone can do this task. The lack of utensils or not enough tables can have a big impact on the event. This is something you don’t want to happen. If you are not sure about the setup, better leave it to professionals so you can be sure that the outcome will be great as expected. Plus, you get to spare yourself from all the stresses that may come along with preparing the setup.

 

Meet the Deadline

Working in an office may require you to juggling so many tasks in a day. With all these, you don’t need to add more to your tasks. By hiring good caterers to take charge of the lunch, you can focus on the things you have to do without worrying if everything is going well with regards to your lunch event. You can put your confidence on these people as it is their job to make sure that you get the job done. So, when you have a deadline to beat, just hire the best people to take charge.

 

Source it Out

It can be a bit of a challenge to exactly know how much food is needed, especially if your office is growing. Of course, you have so much on your plate already and you can’t afford to spend more time on food estimates. But with the help of office catering Sydney, you will not only bring great food in the table, but the other details for the event will be handled as well.

If you have found a great catering company, make sure that you take advantage of their experience and expertise. Let the manager of the catering company do the heavy lifting of planning the menus, volume of food, and logistics. By working with one, you get the benefit of building a good relationship with professionals who knows your catering needs.

 

Waterjet Machine: Keep it Running with Proper Maintenance

The high-pressure coming from a waterjet machine allows the cutting of a very wide range of materials using cold water or mixing water with abrasive for hard materials. The power and accuracy of the machine allows high-precision cutting even for shapes that can be complicated to cut.

To make sure that all these are achieved, proper maintenance should be done in the machine so it can get the job done while meeting the expected results.

 

Running the Equipment

The more the equipment runs, the more chances for things to break. Running it at a high pressure will need more maintenance.

 

Taking Care while Doing the Maintenance

If you rebuild your waterjet machine in a clean room, it can last longer than rebuilding it in a dirty environment. There are many high-precision components in the machine that have microscopic bits of grit that could get damaged easily. Just a bit of dust getting into the jewel in the nozzle could cause the machine to shoot to the side and cause the wear of the mixing tube. Make sure to take the parts to a clean area with a sink so you can wash them before reassembly.

As soon as you get your machine, expect to be overwhelmed during the first days of training. As soon as you have completed the training, you will be confident knowing that you can operate it and getting an idea of how to properly maintain it. But it will be after a few weeks before you can do your first maintenance.

 

Frequency of Maintenance

Water jet cutters definitely needs maintenance. For example, you should change the nozzle parts on a regular basis. For the pump parts, they are changed less frequently. Make sure that you keep the critical aspects at hand so you will not stop machining while waiting for the spare parts to arrive.

Generally, the maintenance will depend on how much pressure you run, as well as the frequency of the on and off cycles of the machine. At the same time, if there hard or dirty water, you may have to perform maintenance more often. It may also require you to invest in a filtration system or to purchase a water softener.

 

Ease of Maintenance

In most cases, anybody who is capable of changing the brake pads of a car can keep an abrasive jet machine going, given a good manual and training, as well as some occasional call to a tech support guy. Mixing tubes could get wear but they can be easy to replace. But pumps would require occasional seal changes. Depending on the design of your pump, the seal could anywhere from quick and easy to time-consuming and difficult to replace.

Any machine, without proper maintenance is bound to fail eventually. So, if you want to make the most out of your machine’s performance, make sure that you know how to maintain it properly.

 

CNC Plasma Cutter for Sale: What Qualities to Keep in Mind

With plasma as a very powerful cutting agent, plasma cutting has been a whole and different technique. Efficient and rapid results have been more possible. Due to its many properties, different plasma cutting equipment has been created for specific purposes. The challenge here, however, is on how you can keep your equipment always running at its best.

There are some practices that can help increase the efficiency of your machine, improve its cut quality and extend its life. A CNC plasma cutter for sale like plasma cam is very to use and it can be very tempting to immediately open it and get to work. But it is very important to keep in mind that before you buy one, the most important qualities of the machine should be considered first. This will ensure that you are not wasting your money on a machine that will not deliver the expected results. Below are some of these qualities.

 

Cutting Thickness

It is very important to consider how thick the material that you plan to cut is. It would be best to choose a CNC plasma cutter for sale that is capable of cutting thick materials. Though it may seem like buying more than what you need, it will provide the right capability to cut thicker materials when needed. At the same time, you will get high quality and precision cuts.

 

Cutting Quality

The cut quality that the cutter offers should exceed your needs. The quality of the finished cut greatly affects the quality of the part and the time needed for secondary operations and cleanup. There are high quality plasma systems that have tight focused arc, making it possible to achieve a smooth, clean, and straight cut.

 

Torch Height Controller

For your plasma cutter to offer long term value, the set up and use should be easy. Choose the one that is easy to learn and operate. It would be a lot if it comes with time-saving features like a height control system. A cutter that is simple to use and incorporate cost-saving features will help increase your productivity.

 

Consumables

Another important thing to consider when buying a plasma cutter is that it should make consumables last longer. Only purchase the right and recommended consumables for the machine. Cheaper brands often do not last long and do not offer high quality cuts.

 

Get a Quality Machine

Investing in a good quality machine will ensure that you can use it for a long time while it delivers quality results. If you plan to buy one, be sure to choose based on the intended purpose, capabilities, and features. Also, be willing to pay more if you are after of a good quality cutter. In most cases, the more expensive ones deliver the best results.

What to Look for when Buying A Chemical Storage Cabinet

Chemicals has a big role to play in most companies in their daily operations. Whether these are proprietary substances that are used in their manufacturing process, or solvents for degreasing and cleaning, harmful chemicals exist in the workplace.

One of the most important measures that can help mitigate the risk of chemical exposure to the people or the environment is proper handling and storage.

For most hazardous chemicals, they need to be safely stored away from people’s reach and placed in a chemical storage cabinet and only trained personnel should handle them.

 

Identify the Chemicals

Before you head out to buy a chemical storage cabinet, you need to determine the variety and types of chemicals in the facility first. Every chemical used in different operations need to have a Material Safety Data Sheet. This should contain information on how each chemical in the operation should be stored.

 

Chemical Segregation

Proper segregation of chemicals is very important for everyone’s safety. This will also ensure that incompatible materials will avoid inadvertent contact. Combustion, fire, toxic or noxious gases, and violent chemical reactions are consequences of improper segregation.

Acids should never be stored with bases. For oxidizers, they should not be kept together with organic materials or any reducing agent. It is recommended to have a separate storage area or a physical barrier to properly segregate them.

 

Storage Considerations

When choosing a cabinet to segregate different chemicals, the primary consideration should be the chemical’s compatibility with the material used in the construction of the cabinet. The corrosive properties of a chemical should always be taken into consideration when looking for cabinets, such as a metal cabinet. For instance, corrosives like caustics or strong acids are likely to corrode the majority of cabinets with metal construction.

A good choice for such substances will be an epoxy-painted or non-metallic cabinet. Such cabinets can offer a better service life with these strong corrosives.

On the other hand, metal storage cabinets are not recommended for flammables. There are specific cabinets for flammables that can minimize the risk and damage to the employees and the facility in case of spill or accident.

 

Other Considerations

There are more considerations when choosing a storage cabinet for chemicals such as the size of the storage area and the quantity of chemicals in the facility. Aside from chemical compatibility concerns, safe handling needs weekly inspections of the storage areas and a strong inventory control. Make sure that all chemicals are labeled properly and stored right. Moreover, chemicals should not be stored on fume hoods on the floor, bench tops, or in traffic aisles. Shelves should not be overcrowded and no item should be above the eye level.

Danger is always possible when there is a presence of chemicals. This is why they need to be properly handled and stored so danger and any form of accident will be avoided.

 

Fire Rated Wall: The Different Types for Oil and Gas Projects

To be protected from fire outbreak is among the most important safety measures that one should apply during the designing process of a gas and oil project. For such, it is a must to define the type of architectural outfitting that is needed and the fire rating it needs to have in accordance to the requirements of the project.

A fire rated wall is an architectural compound that compartmentalizes the structure to contain or slow down a fire. Every part of the said structure is divided into specific fire ratings and its walls should conform to the rating. Considering the risks that a specific compartment may pose, the rating should be identified accordingly.

Here are the different kinds of fire rated walls that could be applied to both oil and gas projects.

 

Welded

A traditional wall system is the one wherein the fire rated panels are being connected to one another and the primary construction is by welding. It is commonly used on structures in the gas and oil industry for a long period of time. One of its main characteristics is that it is fully-welded, heavy-weight, heavy-duty, and blast and fire resistant. Generally, it has an outside corrugated wall made of either stainless steel, duplex, or mild steel materials.

 

Bolted

This one is considered as an unconventional way of modern wall system. The panels for this type of wall are connected and interconnected to the primary construction means of bolting. It is medium-weight, medium0duty, and fire and blast resistant. Since the wall is medium-weight, it has a faster time of installation and bigger cost savings. Another benefit is that no hot work is involved during the time of installation, making it appropriate for offshore applications.

The exterior of this wall is out of a coated stainless steel or mild steel and attached to the insulation system to guarantee its blast and fire resistance.

 

Sandwich

 

This wall system is a specialized polystyrene wall cladding system that has three layers. One is the thick core layer of low-average mechanical strength, density, and two metal faces. Its thick core is utilized for insulation against thermal, sound, and fire requirement and is made of mineral wood.

On the other hand, these two metal faces are made out of steel to offer firmness to the core and provide protection against environmental factors. These three layers are being connected to one another using specialized adhesives.

Sandwich walls are easy and fast to install and are lightweight. The total cost is reduced as a result of lesser installation time. These walls are also weather and gastight and has a great corrosion resistance.

So, these are the three types of fire rated walls that you will see in gas and oil projects. If you belong in this industry, be sure that you know which of these types is the right one for your project.

 

Ceramic Solutions: The Best Way to Clean your Tile Floors

Aside from their versatility and phenomenal beauty, tile floors have the great advantage of being low-maintenance. Ceramic floor tiles have so many benefits to offer. Ceramics are made of natural particles that are being shaped and then fired in a kiln at a very high temperature.

The process is what gives it resiliency and durability that other flooring surfaces could not compete with. When these tiles are glazed, they get a protective barrier from water, dirt, chemicals, and stains that make them resistant to different elements. Although they are easy to maintain, as part of your ceramic solutions, you still need to take some important steps to make sure that they are always at their best condition.

How to Clean the Tile Floor?

 

Spills and Dirt

One of the most important aspects of cleaning the floor tile is to make sure that spills and dirt will never have a chance to get comfortable in them. But as these things are possible to happen, instead of restricting people to walk on the floor, tracks and spills should be cleaned up as soon as possible. This can be easily done using a cloth or mop, hot water, and a household detergent.

 

Regular Maintenance

Regular maintenance is very important. The fastest, easiest, and most effective step that you can take is to regularly vacuum, sweep, and damp mop the entryway, bathroom, and kitchen tile floors. A quick sweep can get rid of dirt and debris become they get embedded in the grout or the tile itself. Mopping the floor with a mixture of warm water and cleaning product will enhance the color, shine, and gloss of the tile.

 

Cleaning Products

There is no need to look further when it comes to cleaning products as part of your ceramic solutions. The best products are those that you find in your house. Water is one of the most effective when it comes to making your floor tiles look great. You can mix water and white vinegar to eliminate odor. This is a great cleaning hack, especially if your have kids and pets at home.

 

Take Care of the Grout

Grout holds your ceramic tiles in place. But through time and with constant exposure to elements, this could become dingy and discolored. This can affect the beauty of your floor. But you can prevent this from happening by taking care of your grout. The best way to do it is to seal it as soon as you have installed your tiles. This will help keep dirt, water, and stains from penetrating into the protective barrier. It is recommended to this at least twice a year. For grouts that have become dirty, you can mix water and hydrogen peroxide in equal parts. Apply the mixture using a toothbrush to remove the stains.

High slip resistance ceramic tiles have hygienic qualities, resistant to stain, and are very easy to clean and maintain. This is why they are commonly used in different settings. You can always make the most of your floor tiles as long as you do the above-mentioned things.

 

Product Design Melbourne: Tips You Should Never Miss

Product design is so much like art. Vision and creativity always come together in order to something attractive, new, and bold. However, each product design Melbourne and designers face different challenges. They need to create something while having the users on top of their mind. It is a must that their creation is useful and will be accepted in the homes of the consumers.

To design a product is always a challenge. This is also never a small task since most people do not really know what their needs are. A product designer needs to have intuitions, practice, and skill. Here are some of most helpful design tips that you have to consider when making a good design for your consumers.

Usefulness

This may seem obvious, but should always be kept in mind. A product should be useful, otherwise, it would not make sense to call it a product. The main priority should always be utility, but it should not only apply to the product, but to all aspect of the design.

 

Aesthetics

Functionality or usefulness is of great importance, but a product design expert in Melbourne should not be carried away by thinking that performance is all that matters. The feel and look a product are equally important in any good design.

 

Attention to Details

Even little things do matter a lot. Form, fit, polish are the things that may not always jump out at people, but the collective effect of imperfections makes all the difference. Acquiring the details right could impress the consumers, especially that we are not in the time of mass produced and cheap disposable goods. As a designer, you should treat each component of the product with respect.

 

Innovative

Not every product can offer something that is whole and revolutionary. In the real world, the majority of products and inventions are improvements to the existing methods. For people interested in your product, it needs to be innovative in a way that it will connect with your consumers.

 

Longevity

Good design will always be timeless and if you have a well-designer product, you can rest assured that it will last the test of time. A long-lasting is very valuable to the consumers, contributes to the planet, and makes a statement to the skills of its designer. Just like the vintage items in your house such as your clothes or old cars, they are still with us today because the designers of these items built them with an intention to last. Yes, good design will never go out of style.

Behind every good product is a great designer. This is why today, there is a constant challenge to find the best designers to create the best products that will make a great difference in the lives of the people.

 

Ceiling Fans with Lights: Ventilation and Illumination in One

Ceiling fans are among the best home decors that you can have and they are not just mere decors but they come with a lot of benefits and functions. One of these functions is to circulate air inside a room to achieve a comfortable ambiance. Along with time, there have been so many innovations that made such decoration a lot better. Today, we can see ceiling fans with lights that become another source of lighting in the bedroom or living room and many other benefits.

 

Beauty and Function

It is a given that ceiling fans can make an area more attractive. Aside from this, it makes the area comfortable and the ones with light make the place well illuminated. So, if you want something that can enhance the look of your space while serving so many purposes, ceiling fans with lights are a great option.

 

Styles and Designs

Ceiling fans come different styles and designs and they are all elegant to look at. With so many options to choose from, it is easy to find one that will match with the other decorations in your home. Whatever theme you have for your decoration, there will always be a fan to go with it. It is also possible if you want some decorative ceiling fans in your patio or veranda because there are damp units available that are resistant to dampness and wetness.

 

Air Conditioning and Heating Unit

Ceiling fans function as both air conditioning and heating units. During the summertime, they can be set in a counter-clockwise motion to circulate cool air. In winter, the blades move in a reverse motion so they distribute warmer air to the room.

 

Savings

The dual function that ceiling fans with light can provide equal to great savings. There is no need to worry about purchasing or installing some additional light units to the ceiling because you have them already in your ceiling fan. Depending on your personal choice, they can have down lights or up lights in them.

For a cozy and warm effect, you can have up lights that direct their beams toward the ceiling. These are perfect in the den or the bedroom. On the other hand, downlights direct their illumination downwards. These are ideal in spaces where a lot of tasks need to be done like home offices or the kitchen.

More than the light that they offer, it is the cool atmosphere they bring in the home that such devices are made for. They supply and circulate cool and refreshing air inside the room so everyone feels relaxed and comfortable. These types of ceiling fans are indeed multi-functional that all of us are truly thankful for having them around.

Aircraft Fuel Tank Corrosion Control

Proper maintenance in the aircraft is imperative especially when inspecting for corrosion to aircraft fuel leaks and other damages, which could lead to disasters. Repairs can be very costly and time-consuming, that is why corrosion control is crucial. To ensure that an aircraft is in good condition to fly, it is important to understand firsthand the possible causes of corrosion the most effective way to control it.

Causes of Corrosion

Fuel contamination is oftentimes the cause of corrosion in aircraft fuel tanks. The cause of fuel contamination is the primarily bacteria. It comes from already contaminated fuel or poor fuel tanks maintenance and failure to inspect properly.

Aircraft fuel tank corrosion control begins with proper maintenance. While some products minimize the bacteria, no products can completely prevent bacterial growth in the tanks. Thus, implementing a proper maintenance routine is the only way to control corrosion. Using these products together with a good maintenance routine will help prevent expensive repairs.

 

Removing Corrosion

Inspect thoroughly the entire fuel system. If there is corrosion, damage assessment is necessary to determine the extent. Follow the protocol in repairing fuel tanks, including documentation. The process involves cleaning and stripping the finish from the area where there is corrosion. Then, followed by the removal of corrosion, and then restoration of the surface protective film. The part may be replaced, depending on the extent of damage. Refer to the damage limit set by the manufacturer.

Removing corrosion is a tedious and time-consuming process. It involves blast cleaning and then blending of reworked areas in the surrounding surfaces. Then, there will be more cleaning with polishers and brighteners for corrosion control in aircraft fuel tanks.

 

Fuel Tank Leaks Repair

Corrosion can cause leaks and other significant problems in the fuel tank. A fuel leakage can ground an aircraft for days or even weeks to repair it. It is one of the most time-consuming repairs. It requires expertise and extreme scrutiny to make that there will be no holes and leaks overlooked. One must also be very familiar with the type of fuel tank system the aircraft has. Only knowledgeable and expert personnel do the repair. TO be more certain, contact the supplier or manufacturer of the fuel tank.

Repairs are done either in the field or in an FAA-approved repair station. Once repair is completed, it is critical to run another inspection to see if there are still leaks. If there are none found, the fuel tank still needs to sit for at least one more day before installing it to ensure that there are no small leaks.

 

Key Points

Corrosion control in aircraft fuel tanks will not only prevent costly repairs, but also to keep the aircraft safe. Implementing a continued maintenance and inspection program in aircrafts will help prevent or minimize corrosion. This will prevent the need for expensive and time-consuming corrosion rework and removal, and fuel leaks repairs due to corrosion.