Does Your 3D Printing Machine Need Maintenance?


Your 3D printing machine has delivered your best expectations, from day 1 that you first bought it. Over time it became an indispensable piece of equipment for your production process. Then, one night before leaving your facility to go home, you attempted to start your 3D printer, in the high hopes that your prototype would be there waiting for your arrival the next morning.

Then it dawned on you. There is an error being displayed on your 3D printing machine, and it rendered your equipment completely unusable for that matter. Much like everything else, your 3D printer requires proper maintenance and care. In the absence of those, you can’t expect longevity for your equipment. 

Here are some of the valuable tips that will help optimize the value of your 3D printing machine

Should Be In The Right Environment. 

Enterprises owners who employ the use of 3D printers are not even aware of this but the longevity of their printing machine is highly dependent upon its surrounding environment. In the ideal setting, it should be installed in an office environment.

 It works to the advantage of the printer in such a way that there are minimal amounts of dirt, dust, and debris that are likely to get into the machine printing filament. Installing your 3D printer, say, in a manufacturing environment will increase its exposure to stubborn dust and dirt. 

Next, to dust and dirt, the next thing that you need to consider for your 3D printer is the ambient temperature. The ideal room temperature for this type of sensitive printer equipment is between 21ºC and 24ºC. The temperature within this range for your 3D printer is most likely to result in best prints ever. A bonus for that is it further enhances the longevity of your 3D printer.  


Even if you install your 3D printer in a spic and span, secluded spot, you must ensure the printer itself is also neat. Whenever the nozzle is clogged, you need to clean it to get the best results the next time that you use it. A special stainless steel nozzle can be used for this purpose. 

Cleaning the printer bed is a must, too, but always ensure to use a proper cleaner. As for the filament waste bin, it should be emptied every time and don’t skimp on the filament you’ve seen falling its way to the bottom part of your printer casing. 

Maintenance Schedule

Next, in line to what you can handle on your own, it is also of prime importance that you check out the technical aspects of your printer. 3D printing machines usually have their very own built-in schedule for maintenance, which works primarily based on the number of rendered printing hours.

The moment that your printer reached its 2500 printing hour mark, the maintenance key screen should be displayed. This interface is the point in time that you will need to have your 3D printer serviced by professionals.

Servicing is highly recommended when your printing machine finally reached its 5000 and 10000 hours mark. By then, some parts would be requiring replacement already due to the normal wear and tear.  

BBQ Catering Sydney for Different Events

In Sydney, BBQ catering is one of the preferred options for various types of events. Choosing the right catering company matters a lot as this will guarantee that you will have great food, thus making the event a success. The guests will also appreciate this kind of food almost anywhere. But hiring one, especially the reputable ones can be a bit expensive. 

BBQ Catering Sydney for Different Events

But of course, if you want to guarantee quality and the best results, then be prepared to invest a bit more. The best thing about this kind of catering is that you can have this for various events.

BBQ Catering for Weddings

Just like other types, BBQ catering is a great solution for many people in Sydney for wedding. In most cases, people opt for budget style as this allows them to save a lot of money. With this style, there is no need for you to hire servers to serve the food.

On the other hand, you can also choose a plated dinner if you are looking for something that is less casual yet elegant. Regardless of the option you choose, you can save money on this unlike with other types for the wedding. You just need to find out the cost for every person and make a comparison with other foods.

BBQ Catering for Birthday Party

This type of catering is a good choice for birthday parties where you need to provide food to a lot of people. The guests come in all ages and most likely, all of them will love BBQ foods whether the party is held at home or you have rented a place for the event. 

With this, your guests would be able to have fun while relaxing and enjoying some great-tasting food. Although most BBQ parties are in the summer, the truth is, you can actually have it throughout the year, especially when done indoors.

You have this type of catering even if you don’t have to feed a lot of people. The menu may include meatloaf, rolls, spare ribs, brisket, smoked turkey, and many others.

BBQ Catering for Office Party

You can also consider this type of catering if you have an upcoming office party. This will guarantee that your co-workers and bosses would love the setup, after all, everyone loves BBQs. All of them will definitely compliment you for such type of catering. Therefore, if you want to impress the people in your workplace by giving them a memorable experience through food, then you should consider this type of catering.

You can never go wrong with this type and this is likely to leave positive impressions from your guests while saving you from a lot of trouble with the preparations. You just have to work with the right catering company. More: gourmet catering sydney

Digital Marketing Company Melbourne: 5 Tips to Hiring the Best One

Digital Marketing Company Melbourne: 5 Tips to Hiring the Best One

In this digital world, business owners are always on the lookout to establish a strong online presence in order to boost their business. There has been a growing need to be visible online and drive more customers. This is especially true for small start-ups and small to medium-sized businesses.

For a business to improve their online visibility, generate new leads, and drive profits, it is very important to hire a digital marketing company in Melbourne or in your area to achieve online success. Here are some tips you need to take into consideration to make sure that you are hiring the best company.

Check the Company’s Track Record

Before you start giving out responsibilities to a marketing agency, you need to go through their records first. You need to do proper research and find out more about their previous projects. Doing so will also help you have a more comprehensive idea about the company and their services.

The company’s online reputation plays an important role as it will offer your business with an extra advantage as the company that is handling its marketing has an established name in the online world.

Expertise Makes A Difference

Hiring a digital marketing company in Melbourne who has acquired many years of experience in the digital world can make a great difference when it comes to the success that your business will be getting in the online market.

The company needs to be experienced, has certified professionals, technically sound, and is experienced in practical knowledge. This is an important factor that you should consider before you hire one for your marketing needs.

Proficiency in Delivering Services

Among the most important areas that should be given attention is on how you plan to the job done in the most convenient way. There are a lot of online marketing agencies that do not offer genuine and convenient services that your business needs for it establish a good reputation online.

Therefore, you need to do your research to get in touch with a reputable company that will provide you with a comprehensive marketing services in order to propel your business to the right direction and reach your target audience.

Effective Channelization of Strategies

Experts in digital marketing knows the right ways to help a business gain its much-needed online presence and to drive more sales effectively. They can also guide you every step of the way and implement the right strategies.

Effective Use of Keywords

It is very important for a company to know how to properly use keywords that are relevant to your business. This will greatly help improve the ranking of your website.

To gain more quality leads, it is important to catch the attention of the people, specifically those who are active on social media and increase engagement. A reliable agency will be able to channel social media optimization activities to your advantage by promoting your products and services on the different social media platforms. Doing this will drive greater conversion, thus increasing your sales. 

So, if you want to see some positive results in your business, the secret is to hire the best digital marketing company.

What to Look for When Shopping for Vacuum Sealers

When it comes to keeping your food items fresh for longer periods of time, vacuum sealers can definitely make the difference you are looking for. It does a great job on that.  It is pretty normal for an Australian household to consume and have a lot of perishable food items, and that on a daily basis. If there are leftovers, they need to stored nicely, otherwise, you are running the risk of them getting spoilt really soon enough.

What to Look for When Shopping for Vacuum Sealers

This is the challenge for the vast majority of homemakers and housewives today,  how to keep their food fresh, good-tasting, and still appetizing for the next round of  serving. Vacuum sealing machines for domestic applications are made for this purpose. If you will try to shop for your first ever vacuum sealing machine, you will realize that there is a  manifold of choices for this, from simple to sophisticated sealer. The wide spectrum of choices often makes it difficult to make your decision on which one is the best to take.

You may need to look out for these few basic concepts so you can get the most value for your money. The following pointers will be of significant help on this.


This is the first and foremost point that you need to keep an eye on when trying to look for vacuum food sealer to buy, their sealing quality. This is the primary purpose why you are trying to look for a good one, so it just make perfect sense to check this out first, above everything else. If ever this feature is not working out right for the machine, it runs the risks that your food will be exposed to moisture, oxygen and a host of other unwanted elements. Hence, causing your perishable food item to get spoilt pretty quickly than anticipated.  

Density of Material

Sometimes, it is inevitable not to have lots of leftover foods in a household. If you are a homemaker and often faced with this kind of situation you should consider buying instead thicker bags for your sealer. Look for something that is indeed very dense so that it can provide the protection you food requires.

Of course, dense bags are way more durable than thinner varieties that are usually found in the market these days.   

Frequency of Use

In your estimation, in a typical day how often do you think that you will be using your sealing bags? Your response to this will definitely become a big factor on how you will make a decision and you are set out to buy your sealing machine.

Consider this too, if you are planning to make use of your vacuum sealed bag several times over, I suggest that you buy small bags instead. On the other hand, if you intend to re-use the bag several times over, resorting to the use of zip-lock pouches is more practical in such a way that they are cost-effective and durable, too.  

The Benefits of Using Waterjet Cutting Machine on Steel and Aluminum

  The Benefits of Using Waterjet Cutting Machine on Steel and Aluminum

The use of waterjet cutting machines is not new because they have been around and have been used as early as the 1950s. This type of cutting machine came about after a forestry engineer found himself in dire need of a better way to cut lumber. From that moment onward, it underwent a number of cutting-edge improvements.

Today, there is no denying to the fact that it is now indeed one of the most indispensable tools to have when it comes to cutting almost any flat object. Stainless steel is not one of the exceptions here.

Compared to other techniques employed in cutting metal like stainless  steel, the use of waterjet cutting technology is way more advantageous than others and offers us the following benefits:

Waterjet Cutting Machines Does Not Generate Heat

When it comes to cutting materials that are known to have a sensitivity to high temperatures, it is safe to say that waterjet cutting is the most preferred method of many. Simply because it is not known to ever generate heat.

The absence of heat-affected zone (HAZ) in this technique in cutting flat objects will allow you to cut any metal sheet minus the possibility of incurring damage or alter the surface of the material you are trying to cut.  

High Level of Precision

Did you know that water jet cutting machines are considered as among the most precise cutting tools? They allow you to cut flat surface objects to an accuracy of 0.005″ (0.13 mm). No other modern techniques can make a claim to come close to this level of accuracy.

Aside from that, it offers you a high level of cutting precision, they also provide your work with a burr-free finish. In most cases, this alone is good enough and would eliminate the need for secondary surface finishing. This works to your advantage in the sense that it helps you to save more money.  

Environmentally Sound Option

Since waterjet machines are not likely to put the environment to harm’s way, we can line them up along other green technologies that we have in use today. Like for instance, its process of cutting will not produce hazardous waste materials.

What these cutting machines produce instead are reusable scrap materials that can still be cut off for further recycling. Basically, nothing here can go to waste.  

Another reason why waterjet is environmentally sound to use is that they require only a measly amount of water to run. Most of these machines will probably use half to a gallon of water per minute and this would directly depend upon the size of the cutting head orifice you are planning to use.

Finally, waterjet cutting machines may produce “wastewater”. But this wastewater though is actually clean water. Apart from sediments or debris, it may contain, which is inevitable,  due to the cutting process, you may have them filtered and after which you can dispose of them off through your drain. see- water jet cutter.

What to Look for in A Vacuum Sealer Machine?

What to Look for in A Vacuum Sealer Machine?

A vacuum sealer machine has an important role to play in keeping foods always fresh for a long time. As we consume food on a daily basis, many of them are perishable. With this machine, foods are kept nicely so they do not get spoilt easily.

When you go to the market and search for one, you can expect to see a variety of them. The machine comes in a wide range, from the simplest to the most complicated ones. Therefore, you need to know some basic concepts to help you decide and acquire the best one for your needs.


One of the most important points to watch one for when looking for a vacuum sealer is its sealing quality. The main purpose why you want to purchase the machine is for sealing. Therefore, don’t miss to check this factor. If such a feature does not function properly, foods will be exposed to moisture, oxygen, and air particles that make them spoilt quickly.

Material Density

When you have to store perishable foods, you need to buy bags or covers that are thick. The material should be dense as it will offer extra protection for the food. A denser bag means that it is more durable than thinner ones that are found in the market. If you are after of ultimate protection against moisture and other particles, go for thick covers.

Type of Sealing

Vacuum sealers come in different types. They are mainly used for commercial and residential purposes. Some of them come in the form of covers/bags, some as bottle stoppers/jar, zip-lock patterns, rolls, battery-operated models, packs, meshes, and so on. Therefore, it is important to choose a type that meets your needs.

If you need a sealer for everyday use in the kitchen, a basic model will do. But, if it’s for a commercial purpose, then choose one that is big enough with more functionalities.

Frequency of Use

How often do you expect to use your sealing bag to take out the food that you have stored in it? Answering this question is very important and will play a role in affecting your decision when setting out to buy a sealer. If you will be using it several times a day and if you will be disposing of it after you have taken out the food, consider buying smaller bags. But if you will be re-using the bags, you can opt for zip-locks as they are cost-effective and durable.

Buying a sealer machine is a great investment but of course, you don’t want to end up spending money on the wrong one. Thus, be sure to take your time in choosing until you find one that exactly meets your needs and requirements.

Tags: shrink wrap machine

All About 3D Bioprinting

3D Bioprinting

Did you know that it is now possible to print body organs using living cells? Yes, it’s happening. It’s called bioprinting and it uses a 3D printing machine. The healthcare industry is now taking advantage of 3D printing, which is a revolutionary technology that can produce almost anything. Researches and experiments in this industry are taking place and are progressing fast. Limbs, skin, and body organs can now be printed from a machine.

How it Works

Researchers and scientists use a CT scan or MRI to create 3D models or prototype for printing. These bioprinters come in many types. The first 3D bioprinter used commercially is the NovoGen MMX, made by Organovo.  It features two robotic printing heads, where one puts in the human cells while the other head places the support, which is usually a hydrogel or scaffold.

Another type of bioprinter is the six-axis printer, which uses a robot printer. Unlike traditional 3D printers that build a tissue from scratch, is capable of building multiple parts of a heart tissue and it could move the parts around accordingly. The six-axis 3D bioprinter can print layers. It is also capable of coming back and then start printing another layer on the heart’s exterior. Valves have their own spot, and then a robot could take the valves in and place them in the parts of the heart.

Some 3D bioprinters are inkjet-inspired that can use multiple types of cells and components for printing. Earlier forms of 3D bioprinters place human cells in actual ink cartridges. With a customized program, the printers would then place the cells together in a certain order. Today, it is possible to print skin cells directly on a wound by placing the cells in an ink cartridge.

Cells as “ink”

Once the company chooses a tissue design it will then make the “bio-ink” from the cells. The cells are layered until the tissue is complete. In between are water-based layers, which is hydrogel. The hydrogel can also fill in tiny spaces in the tissue. It also used as support to the printed tissue. Another material that is used to put cells together is collagen. This layer-by-layer process is the same as the tradition 3D printing approach. While traditional 3D printers produce products from the ground up, bioprinters use hydrogel or collagen to fuse cells together, creating a tissue.

Stem cells in bioprinting

Another option for bioprinting bones and different organs is using stem cells, as these cells can easily grow into tissues. Researchers and scientists have been experimenting in making bone replacements that are covered with stem cells. Overtime, these stem cells will develop into tissues. Development of stem cell repair is also another focus of the medical field, which is used for complex tissues such as the tissues that make up the liver, the heart, and other vital organs. Using stem cells in building vital body organs may be difficult, but with 3D bioprinting, it may be possible.

Adam W. Feinberg and Jordan S. Miller, Guest Editors, “3D bioprinting of organs,” MRS Bulletin, Volume 42, August 2017

More info: 3D Printing Online Quote

CNC Cutting Machine Training for More Success

Today, the demand for skilled workers who are familiar and are able to operate complex and modern machines are greatly increasing. A CNC cutting machine is one of the most useful equipment used in many different industries around the world. CNC training equips the workers, both new and existing, to execute well the latest technology in manufacturing.

Proper training of workers is a key to success in business and operations. Having highly skilled and qualified workers is a competitive advantage. Employers are willing to invest on training for their workers. Anybody who has the knowledge and the skills in operating CNC machines is very attractive to employers. Employers are willing to hire and pay for such persons.

What is CNC?

CNC stands for Computer Numerical Control, which is a computerized process. It is simply inputting data to operate a machine. Imagine a perfect world where every machine works and produce exactly how and what you wanted it to. This is the case with CNC machines, whereby the machine will do exactly how you programmed it. This is why employers need skilled programmers.

CNC Training Courses

One can gain knowledge about this process through CNC machine training programs. You can choose from a range of courses, which varies according to the level of student needs. The course or program includes information about the different CNC machines, as well as the other tools and equipment used in the operation. Manufacturing companies also offer training programs for their CNC machineries when you purchase from them.

CNC machine training consists of courses that can teach you from the basics up to more intricate work. You will have several choices in most courses. A typical CNC training course would include the definition and history of CNC, mechanics, turning center and machining center basics, Swiss type lathe basics, coordinates, machine parts and the codes used, manual operations, milling and lathe operations, and offsets.

Workers and operators will be required to have continuing for them to stay updated in operating the machine and working in the industry. A good machine is not enough to produce your desired outcome. It takes the right people who are knowledgeable, skillful and able to do the job to make CNC machine operations successful.

Some companies offer on-site training while others send their workers to specific training centers. You may also want to take a self-pace CNC machine training course online. If your employer is not willing to invest in training for you, then you can always learn independently.

Read more: Plasma Cut Metal


CNC machine training is the answer for anyone who wants to be competitive in this fast-pacing and dynamic world of machines and technology. CNC operators and programmers must be well-versed with this technology and keep up with the ever-changing machineries.

Plasmacam Australia: What is It and How it Works?

A plasmacam is a kind of software that runs on computers. This program is used to create designs and control the cutting table and see if the machine is working well. Regardless if you are just a hobbyist who loves to create some pieces or in the business of metal fabrication, plasmacam Australia is definitely the right tool for you.

Today, these plasma cutters offer so many possibilities for different industries and thus, businesses are greatly benefiting from them. In fact, they even help in the making of cars and even props for movie studios.

The Importance of the Software

Plasmacam Australia offers a cutting table that includes the use of a hand-held plasma cutter that is controlled by the computer program software. With this, shops become capable of creating a one-of-a-kind masterpiece. In addition, large sheets of materials could be used with only very little waste released in the end. Moreover, cutting all the necessary parts out of a single sheet can contribute to cost reduction.

The table runs off the computer and reproduces a scanned image, information from a drawing program, and computer font. This offers a very wide range of potentials for various businesses.


High-Quality Products

A plasmacam offers high-quality products that are engineered from the ground up. Starting from the table to the cutter, to the software, the plasmacam designs each aspect of the machine. With this, companies can now dedicate their efforts in providing top-notch CNC technology that is mixed with robotic technology which is considered to be more cost-effective.

The machine works with the help of a computer through a printer cable and this reproduces images in a very short period of time. The computer is considered to be the brain behind of such machine.  The program dictates the machine what needs to be done and how fast. It also controls all aspect of the machine. Interestingly, the program can be saved and used later. For new programs, they can be developed for the purpose of initiating new projects. Essentially, almost anything can be done with this machine.

The table can cut a 4-ft by 4ft area and can utilize materials that are given in sheets with a measurement of 4×8 or 4×10. The said software program allows people to lay out their projects and cuts different images for up to 20ft in length. When it comes to this technology, the possibilities are endless. Thanks to the help of a plasma cam and the chance it offers to high-technology machines. It is no wonder why more and more companies are incorporating the technology in their business as it offers them numerous benefits.

So, if you have a project that needs the help of this software and technology, rest assured that you will only achieve the best results you deserve.


Use of Vacuum Packaging Machines

Not everyone may know and be interested in a vacuum packaging machine, but this equipment has made a huge impact on the packaging industry. It has also made a difference in everyone’s life, one way or another. In fact, it has become a popular smart kitchen accessory over the years.

Other terms used to refer to this machine are the chamber vacuum packer and the external vacuum packer or external bag machine. The external bag machine is ideal for home use, while the chamber vacuum machine, which is big and heavy, is commonly used in commercial settings.


Vacuum Packaging Machines for Home Use

A vacuum packaging machine helps reduce waste, allowing food to last longer. If you want to get your own external bag machine, you need to decide on your budget. If you buy cheap ones, you will get what you pay for. Choose the machine that works well and will keep working well for a long time. Check out also the warranty provided for the machine you will purchase.

This home use vacuum packer has an open port the vacuum bag is attached. When you switch the machine on, the air is emptied. With some external bag machines, the heat sealing of the bag is done at the same time. While with other vacuum packers, sealing of the bag is done separately.


Vacuum Packaging Machines for Business

In the past, only the major fruit and vegetable exporters have the access to vacuum packaging machines. However, because of the recession, prices of these machines fell dramatically, making them far more accessible and affordable to smaller businesses. The problem, however, with these businesses is that they are not used to maintain and keep these machines. Keep in mind that if these machines are not maintained to a good standard, they are most likely to go wrong and you will be spending on repairs. The main areas to monitor include the seals and the heating strip.


The Seals

The entire process of vacuum packaging greatly depends upon the quality of the seals used. Otherwise, it will not be good to use anymore. When the bag is fastened to the machine, the entire area around it must be sealed to create a vacuum.  Then, all the air is sucked out, which is why it is called vacuum. Eventually, after many uses, the seals have a tendency to wear out and lose its ability to create a seal.


Heating Strip

The heating strip is another important part of the machine. You’ll often find the strip covered with Teflon. This covering prevents the strip from sticking to the bag. The Teflon can last for several years, depending on the usage and maintenance, but a qualified technician can easily replace it if the need arises. You will know that it is time to replace it when the strip starts to stick to the bags.