Aircraft Fuel Tank Corrosion Control

Proper maintenance in the aircraft is imperative especially when inspecting for corrosion to aircraft fuel leaks and other damages, which could lead to disasters. Repairs can be very costly and time-consuming, that is why corrosion control is crucial. To ensure that an aircraft is in good condition to fly, it is important to understand firsthand the possible causes of corrosion the most effective way to control it.

Causes of Corrosion

Fuel contamination is oftentimes the cause of corrosion in aircraft fuel tanks. The cause of fuel contamination is the primarily bacteria. It comes from already contaminated fuel or poor fuel tanks maintenance and failure to inspect properly.

Aircraft fuel tank corrosion control begins with proper maintenance. While some products minimize the bacteria, no products can completely prevent bacterial growth in the tanks. Thus, implementing a proper maintenance routine is the only way to control corrosion. Using these products together with a good maintenance routine will help prevent expensive repairs.

 

Removing Corrosion

Inspect thoroughly the entire fuel system. If there is corrosion, damage assessment is necessary to determine the extent. Follow the protocol in repairing fuel tanks, including documentation. The process involves cleaning and stripping the finish from the area where there is corrosion. Then, followed by the removal of corrosion, and then restoration of the surface protective film. The part may be replaced, depending on the extent of damage. Refer to the damage limit set by the manufacturer.

Removing corrosion is a tedious and time-consuming process. It involves blast cleaning and then blending of reworked areas in the surrounding surfaces. Then, there will be more cleaning with polishers and brighteners for corrosion control in aircraft fuel tanks.

 

Fuel Tank Leaks Repair

Corrosion can cause leaks and other significant problems in the fuel tank. A fuel leakage can ground an aircraft for days or even weeks to repair it. It is one of the most time-consuming repairs. It requires expertise and extreme scrutiny to make that there will be no holes and leaks overlooked. One must also be very familiar with the type of fuel tank system the aircraft has. Only knowledgeable and expert personnel do the repair. TO be more certain, contact the supplier or manufacturer of the fuel tank.

Repairs are done either in the field or in an FAA-approved repair station. Once repair is completed, it is critical to run another inspection to see if there are still leaks. If there are none found, the fuel tank still needs to sit for at least one more day before installing it to ensure that there are no small leaks.

 

Key Points

Corrosion control in aircraft fuel tanks will not only prevent costly repairs, but also to keep the aircraft safe. Implementing a continued maintenance and inspection program in aircrafts will help prevent or minimize corrosion. This will prevent the need for expensive and time-consuming corrosion rework and removal, and fuel leaks repairs due to corrosion.

Make Your Job Simpler with a Drilling Rig

Water well drilling rigs are invented mainly for industrial purposes, which is widely used all over the world. It can be used for many tasks involving digging, excavation, and boring the earth’s surface to extract resources and other minerals.

 

For drilling water wells

There is no arguing that water is the most important natural resource for everything living. Water is sourced out from below the surface of the earth to be used for most of our everyday activities. How this underground water that we use come up to the surface is with the use of technology, which essentially simplifies our lives.

 

The machine used is a water well drilling rig. Water beneath the ground is basically pumped up from below the many layers of the earth. With drilling rigs, you can bore holes on the earth’s surface, penetrating deep into the earth’s crust. Once holes are bored into the ground, they insert the pipes through the holes, which then suck up water to the surface.

 

Other uses

 

Drilling rigs are also used to build wells and tunnels, test soil and mineral deposits in the soil, as well as to sample groundwater. Rigs can also be used for constructing swimming pools, ponds, lakes, hunting camps, and even fishing camps.

 

A drilling rig is a very versatile machine that can be used to accomplish many different jobs, including geothermal drilling, geotechnical and environmental drilling, mineral explosion, construction and utility work, and many other industrial activities.

 

Rig Types

 

There are different types of rig according to how it is powered. It can work on mechanical, electric, steam or hydraulic power. This machine can drill down as deep as 300 meters down below the surface of the earth.

 

You’ll find these drilling rigs available in two sizes. One that is small and compact, which is very handy and easy to move around manually by a person. Another type is a gigantic size structure that needs to be hauled and mounted on trailers, trucks or tracks when transporting it from one place to another. You need to know how to choose the appropriate type of drilling rig, depending on how complex the job is.

 

Benefits of using drilling rigs

 

You can use drilling rigs for many different purposes. In fact, many people and companies use these machines all over the world. It can bring about high yielding water wells that can be used by ranchers, farmers, irrigation purposes, and for daily household use. Almost all industrial work utilizes drilling rigs to make the job easier.

 

A drilling rig saves time, energy, and effort. Before drilling rigs were invented, people with the aid of animals would do manual drilling of holes into the earth surface, which is quite laborious. This was time-consuming and prone to accidents. With the rig, you can do the same work quickly and more efficiently.