The Benefits of Using Waterjet Cutting Machine on Steel and Aluminum

  The Benefits of Using Waterjet Cutting Machine on Steel and Aluminum

The use of waterjet cutting machines is not new because they have been around and have been used as early as the 1950s. This type of cutting machine came about after a forestry engineer found himself in dire need of a better way to cut lumber. From that moment onward, it underwent a number of cutting-edge improvements.

Today, there is no denying to the fact that it is now indeed one of the most indispensable tools to have when it comes to cutting almost any flat object. Stainless steel is not one of the exceptions here.

Compared to other techniques employed in cutting metal like stainless  steel, the use of waterjet cutting technology is way more advantageous than others and offers us the following benefits:

Waterjet Cutting Machines Does Not Generate Heat

When it comes to cutting materials that are known to have a sensitivity to high temperatures, it is safe to say that waterjet cutting is the most preferred method of many. Simply because it is not known to ever generate heat.

The absence of heat-affected zone (HAZ) in this technique in cutting flat objects will allow you to cut any metal sheet minus the possibility of incurring damage or alter the surface of the material you are trying to cut.  

High Level of Precision

Did you know that water jet cutting machines are considered as among the most precise cutting tools? They allow you to cut flat surface objects to an accuracy of 0.005″ (0.13 mm). No other modern techniques can make a claim to come close to this level of accuracy.

Aside from that, it offers you a high level of cutting precision, they also provide your work with a burr-free finish. In most cases, this alone is good enough and would eliminate the need for secondary surface finishing. This works to your advantage in the sense that it helps you to save more money.  

Environmentally Sound Option

Since waterjet machines are not likely to put the environment to harm’s way, we can line them up along other green technologies that we have in use today. Like for instance, its process of cutting will not produce hazardous waste materials.

What these cutting machines produce instead are reusable scrap materials that can still be cut off for further recycling. Basically, nothing here can go to waste.  

Another reason why waterjet is environmentally sound to use is that they require only a measly amount of water to run. Most of these machines will probably use half to a gallon of water per minute and this would directly depend upon the size of the cutting head orifice you are planning to use.

Finally, waterjet cutting machines may produce “wastewater”. But this wastewater though is actually clean water. Apart from sediments or debris, it may contain, which is inevitable,  due to the cutting process, you may have them filtered and after which you can dispose of them off through your drain. see- water jet cutter.